Sylic Textile Auxiliary Information

In addition to being used in general daily life, textile articles can also improve their application range after some special finishing processes, such as water repellency, flame retardancy, anti-static and stain resistance. These properties of general textiles do not have, but after special finishing methods to obtain, this type of finishing method is called special finishing. Read More

Polymer defoamer: Polymer defoamer is usually water-based or oil-based, and they can be used in different environments. The main function of these defoamants is to reduce the surface tension of the liquid and prevent the formation of bubbles and foams. Silicone oil defoamer: Silicone oil defoamer is Read More

There are seven common dyes on the market today and today we will take a brief look at how these seven dyes are made. I. Direct dyes:Direct dyes have relatively good heat resistance stability, and soda ash soft water can be added to to help dissolve. Chemical material first with cold soft water to Read More

There are seven common dyes on the market today, and today we will take a brief look at how these seven dyes are made. I. Direct dyes:Direct dyes have relatively good heat resistance stability, and soda ash soft water can be added to to help dissolve. Chemical material first with cold soft water to Read More

Among them, the selection of additives can be divided into two parts: color fixing agent after dyeing and fastness improving agent during high temperature setting. The color-fixing agent can use the conventional caustic soda + insurance powder method. Read More

In order to improve the one-time success rate of dyeing, the indicators of pre-treatment need to be controlled, such as: desizing level, de-oiling rate, fibre splitting rate, gross efficiency, deweight , whiteness and other indicators, through the indicators of the test and control, to develop and amend the pre-treatment process, the pre-treatment of the indicators after the stabilisation of the success of the dyeing is also halfway to success. Read More

This process uses low-temperature scouring agents to perform low-temperature pretreatment on cotton knitted fabrics. Compared with high-temperature conventional processes, the fiber strength after treatment is less damaged and the weight loss is less. The wool effect can meet the dyeing requirements, and the energy saving is obvious, and the sewage discharge is reduced. Reduced production costs. Read More

Application performance test: ① Three degrees of hand feel: Softness, smoothness, undulateness ② Hydrophilic effect; ③ Yellowing; ④ Washing resistance; ⑤ whether it affects the fastness of dyeing; ⑥ Does it smell bad? ⑦ Whitening agent compatibility, etc. Read More

Introduction:Amino silicone oil is a commonly used chemical compound with various applications, ranging from textile manufacturing to personal care products. However, due to its popularity and widespread use, counterfeit or low-quality versions of amino silicone oil have also entered the market. Dis Read More