Home » Products » Textile Auxiliaries » Pretreatment » Degreaser Sylic P1201 (CY-117H)

Product Category

Contact Us


Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Degreaser Sylic P1201 (CY-117H)

Suitable for scouring and decontamination of cotton and its mixtures

  • P1201

  • Sylic

  • General

  • 0.5-1g/L

  • Nonionic

Product Description

Technical Indicators

Main ingredient

Surfactant compound


Light yellow transparent liquid

pH value (1% aqueous solution)




Performance and Characteristics


1. It has excellent scrubbing effect. It can be used for scouring and decontamination of all cotton and its blend of knitted fabrics in the same bath under alkaline conditions so that the fabric obtains a good wool and hydrophilic effect.

2. In the quasi-neutral and weak acid bath, it can completely emulsify and disperse the oil agent, and has a unique effect on removing chemical fiber oil agent. It can be used in the dyeing process of a bath of washing and dyeing polyester fabrics, with little influence on the tone.

3. High concentration product, low foam, easy to dissolve in cold water.




It is suitable for the dyeing and dyeing process of polyester woven, warp and weft knitted and spandex-containing fabrics or blended fabrics in the same bath.


Recommended Process

1. Continuous de-cooking steaming process:

Degreaser Emulsifier Sylic P1200: 7-12g/L, NaOH: 40-60g/L

Temperature: 98-102 ° C, steaming time: 60-90 min.

2. Cold rolling reactor pretreatment process:

Degreaser Emulsifier Sylic P1200: 7-15g/L, NaOH: 40-70g/L, H2O2 (100%): 10-15g/L

Stack at 35 ° C for 16-24h, then steam, alkali wash, hot wash.

The specific process should be adjusted by the user through the sample as appropriate.

Packaging and Storage

Packaging & Storage


120kg plastic drum, sealed and stored in the dark, with a shelf life of 6 months at room temperature.

 Three Main Packaging Types: Woven Bags/Plastic Barrels /IBC Drum

main packaging types



  • What is a scouring agent?

    Scouring Agent is used to remove naturally derived ipurities adhering to fibers and textiles, oil and paste that adhered to fibers in the spinning process, etc. It reduces troubles in the process of dyeing and finishing. Soaping Agent is used to wash out residual dye, dyeing auxiliaries, oil etc. after dyeing process

  • Which process is called scouring?

    Scouring or washing is the first mechanical process that wool goes through, to remove grease and dirt from fleece. Carbonising is unique to the woollen system and breaks down any remaining impurities after scouring.

  • What is desizing and scouring?

    Desizing removes the size applied to warp yarns prior to weaving; scouring breaks down pectins and waxes and helps remove other impurities present in cotton fibres to improve water absorptivity; and bleaching commonly done with hydrogen peroxide under near boiling temperature, removes coloured impurities from fabrics ...

  • Why is desizing essential before scouring and bleaching?

    The continuous desizing, scouring and bleaching process allows to remove the size, to degrade the waxes and natural fats which are contained in the natural cotton (scouring or alkaline boiling), and to oxidize the chromophores molecules.

  • Why caustic soda is used in scouring?

    Uses of caustic soda: Scouring, is a chemical washing process used to remove unwanted materials from the cotton fabric. In this process, the fabric is boiled in an alkaline solution made up of caustic soda.

Our Certificates

Get In Touch

Product Links

Quick Links

Contact Us
Copyright 2023 © Copyright © 2022 Hangzhou Chungyo Chemicals Co., Ltd.